Adhesive primer

• Adhesion primer with casein as binder
• With vegetable casein, white lime hydrate, clay, dolomite flour, dolomite sand. Grain size 0,5mm
• For smooth, slightly absorbent substrates, for applying mineral plasters
• Can be used on gypsum plasterboards, dispersion paints and synthetic plasters
• Consumption: Approx. 100 g/m²

On which substrates can I use casein primer?

• Plasterboard
• dispersion paints
• synthetic plasters
• For smooth and slightly absorbent surfaces

Important: The substrate must be dry, load-bearing, free of grease, dust and oil!

Application:

Stir powder into clear water using a whisk (400 - 450 ml water per 500 g powder). Stir again after 30 minutes of rest. Apply with a brush or alternatively a roller. Important: The primer does not contain any preservatives. Therefore, only mix as much as is used on the same day!

Yield:

Approx. 100 g powder / m²

Drying time:

Approx. 8 hours at + 20 °C, if required, you can also start after 4-6 hours.

Storage:

The adhesion primer with vegetable casein can be stored for 1 year in unopened packs.

Safety advice:

This ecological plaster primer contains calcium hydroxide [Ca(OH)²]. It must not get onto the skin or eyes. Keep away from children!